Ferrous Powder & Filings Removal
The EDS electromagnet drum separator is typically used to recover scrap iron from bulk waste or in conjunction with a recycling shredder. The large drum is required because it is a course separation device and usually deals with medium to large pieces of scrap iron or ferrous metals.
The EN and ENS permanent magnet drum separators are among the most widely used type of magnetic separator and are utilized in a wide variety of applications. The most common application is removal of iron powder from a powdered base material. This is typically subsequent to a grinding or pulverizing operation in Mineral, Ceramic, Chemical or Food processing plants. Additional applications include Recycling plants to separate ferrous and non-ferrous materials.
Recycling, resource recovery and scrap iron removal are the most common applications for the HUF-S. This dry, self-cooled suspension type magnetic separator is specifically designed to maintain high magnetic force even after hours of operation.
The twin pole permanent magnet drum separators are a specialty type separator that are used on certain types of scrap iron separation processes that are not well suited to standard EN or ENS type separators. Scrap metal with low magnetic attraction, such as stainless or alloys, are accurately separated with Twin Pole type separators. Applications are recycling plants separating stainless and alloy metals from non-magnetic materials such as aluminum or plastic.
Nippon Magnetics offers a variety of magnetic pulleys including permanent magnet, electromagnetic, or a combination permanent/electromagnet.
- recycling systems
- chemical processing
- iron smelting
- coal handling
- food processing
- ceramic production
Nippon Magnetics’ tube magnets can capture fine magnetic attractive particles in liquids, slurries or powders. Industries include food processing and chemical processing along with various other processing industries.
Processing of food, powders and wood chips utilized grinding and milling which can leave fine flakes or broken parts such as nails, bolts and nuts in the product. The HGMP is designed specifically to remove these products and return the product to its pure state.
The CG, AT and FAT electromagnetic separators are designed for the removal of fine iron powder from powdered base materials. Common powder base materials include chemical powders, powdered minerals, and dehydrated powdered foods. This device commonly follows a milling or grinding operation.